Arduino Info Display

Small info display project for an Arduino MKR1000 with:

SH1106 OLED display
AM2302 temperature and humidity sensor
Two control buttons

The device is intended to show a compact set of useful screens, navigated with:

Select button
Next button

Planned Screens

The display should support at least these views:

Local time
Weather forecast
Temperature from the AM2302 sensor
Humidity from the AM2302 sensor

Additional screens can be added later once the basic navigation and data sources are in place.

Project Status

This repository is currently in the documentation and planning stage.

PlatformIO project initialized
Target board configured as mkr1000USB
Initial hardware wiring notes documented
Application code not started yet

Repository Layout

platformio.ini: PlatformIO configuration
src/main.cpp: Placeholder application entry point
docs/project-overview.md: Functional scope and behavior
docs/hardware-notes.md: Component and wiring notes

Initial Goals

Build a stable display loop for multiple screens
Support simple button-based navigation
Read local temperature and humidity from the AM2302
Show time and weather information on the OLED
Keep the software structure easy to extend later

Notes

The current hardware pin mapping is documented in docs/hardware-notes.md. That file can be extended later with any extra electrical notes, display module specifics, or wiring photos if needed.

1.6 KiB Raw Blame History